EnglishSvenska

2.13 Inch E Ink Display HAT for Raspberry Pi 212x104p SPI Interface 3 Color

by Waveshare
442 kr 354 kr

The 2.13-inch e-Ink Display HAT for Raspberry Pi has a resolution of 212x104 pixels. This display HAT supports SPI interface and it displays content in 3 colors, Red, White, and Black. The 2.13-inch e-Paper HAT contains an embedded controller. Apart from Raspberry Pi microcontrollers, you can also use this e-Ink HAT with NVIDIA Jetson Nano. The e-Ink HAT for Raspberry Pi is ultra-low-power hardware. It can display the content for a long time without consuming power. E-Ink HAT only needs power when it has to upload new content to display. The view angle is 170o so this display HAT is ideal for shelf-labels and industrial instruments.

Features of 2.13-inch e-Ink Display HAT for Raspberry Pi and Jetson Nano

  • Brand: Waveshare 
  • The display HAT has preserved solder pads for SPI to connect Arduino or Nucleo
  • Ultra-Low-Power display with no backlight
  • Power is only needed when refreshing and uploading new content to display
  • Standard Raspberry Pi 40-Pin compatible extension header that works with Raspberry Pi and NVIDIA Jetson Nano
  • 3V/5V MCUs – Onboard voltage translator

Specifications of 2.13-inch e-Ink Display HAT for Raspberry Pi and Jetson Nano

  • Operating Voltage: 3.3V ~ 5V
  • 3-Wire and 4-Wire SPI interface
  • Dot Pitch: 0.229 x 0.228
  • Dimensions (Display): 2.371cm x 4.855cm / 23.71mm x 48.55mm
  • Outline Dimensions: 6.5cm x 3.02cm / 65mm x 30.2mm
  • 212x104 pixels resolution
  • 3 Color Display: White, Black, Red
  • Grey Level 2
  • Full Refresh Time: 15 seconds
  • Standby Power: Less than 0.017mW
  • 170o View Angle
  • Weighs only 21 grams | 0.021 Kg

Note

  • The 2.13-inch e-Ink Display HAT has a partial refresh time of approximately 0.3 seconds

Items Included

  • 1x 1.13-inch e-Ink HAT
  • 1x 20cm 8Pin PH2.0
  • 2x Screws