7.5 inch e-Paper Display with Driver HAT for Raspberry Pi and Jetson Nano
Click Here to download the complete user guide to working with Raspberry Pi, Jetson Nano, Arduino, Sunrise X3 Pi, and STM32 as well as resources and FAQs.
Introducing the 7.5 inch E-Ink Display HAT for Raspberry Pi – a black & white electronic paper display with an 800×480 resolution and an embedded controller that operates via SPI interface. This incredible display comes equipped with a plethora of features that make it an ideal choice for various applications, such as industrial instruments and shelf labels.
The E-Ink display HAT for Raspberry Pi is a game-changer due to its ultra-low power consumption, wide viewing angle, and clear display without electricity. Additionally, the display doesn't require a backlight and can continue displaying the last content for an extended period, even when the power is down.
Features
- Ultra-low power consumption, requiring power only for refreshing
- Standard Raspberry Pi 40PIN GPIO extension header, compatible with Raspberry Pi series boards, Jetson Nano, and more
- SPI interface for connecting with other controller boards like Raspberry Pi, Arduino, Nucleo, etc.
- Onboard voltage translator, which is compatible with 3.3V/5V MCUs
- Comes with development resources and a manual, including examples for Raspberry Pi, Jetson Nano, Arduino, and STM32.
Possible Applications
This E-Ink Display HAT for Raspberry Pi has a variety of uses, including:
- Electronic shelf labels
- Industrial instruments
- E-book readers
- Smart homes
- Portable medical devices
- Wearable devices
This e-paper display is the perfect choice for anyone who needs an energy-efficient and clear display without electricity. Get your hands on this exceptional display HAT and experience the future of electronic paper displays!
Advantages of E-Paper (E-Ink) Display Technology
The E-Paper Display uses microcapsule electrophoretic technology to display content. This technology works by applying an electric field to charged particles suspended in clear fluid, causing the microcapsule to become visible by reflecting ambient light, just like traditional printed paper.
Some of the benefits of this technology are:
- Clear display without electricity: Display content is clearly visible under lamplight or natural light without a backlight
- Wide viewing angle: Offers nearly up to 180° viewing angle
- Paper-like effect: Often used as an e-reader due to its resemblance to traditional printed paper
Specifications
- Display Size: 7.5 inch
- Operating Voltage: 3.3V ~ 5V
- Resolution: 800 x 480 pixels
- Communication Interface: SPI
- Display Colours: Black and White
- Field of View: > 170°
- Dot Pitch: 0.205mm x 0.204mm
- Grey Scale: 2
- Standby Power: < 0.017mW
- Refresh Power (Typical): 38mW
- Full Refresh Time: 5 Seconds
- Weight: 65 Grams
Pin Definition
- VCC: 3.3V / 5V
- GND: Ground
- DIN: SPI MOSI Pin
- CLK: SPI SCK Pin
- CS: SPI Chip Selection (Low Active)
- DC: Data / Command Selection (Low for Command / High for Data)
- RST: External Reset (Low Active)
- BUSY: Busy Status Output (High Active)
Dimensions
- Display Dimensions: 163.2mm x 97.92mm
- Outline Dimensions (driver Board): 65mm x 30.2mm
- Outline Dimensions (Screen): 177.2mm x 118.2mm
- Outline Dimensions (Raw Panel): 170.2mm x 111.2mm x 1.18mm
Items Included
- E-Paper Driver HAT
- E-Paper 7.5-inch
- PH2.0 8Pin 20cm
- Pack of Screws