EnglishSvenska

ODROID GO Advance Black Edition with Aura Black Cover

by Hardkernel
Sold out
1 091 kr 873 kr

Kindly make sure you know that this is a Pre-Order product. The Dispatch Date is expected to be Someday in the First Week of August. We would like to apologize in advance for any unanticipated delays caused due to the global pandemic, COVID-19. The delay may extend to a few days as no strict control has been exercised over International Shipping.

ODROID GO Advance Black Edition is an advanced edition of the pre-existing ODROID GO Advance. This particular item comes with a clear transparent cover. The following is a list of the emulators compatible with the ODROID GO Advance Black Edition.

  • SNES
  • Atari7800
  • GBC
  • PSP
  • Atari Lynx
  • Sega CD
  • Master System
  • Atari5200
  • NES
  • PC Engine
  • GBA
  • PC Engine CD
  • Atari2600
  • GB
  • PSX
  • Game Gear
  • Mega Drive

Disclaimer

  • Some particular ROMs DO NOT Function at their Full Capacity on the ODROID-GO Advance Black Edition
  • Make sure you have an extra MicroSD Card that has the storage capacity of 8GB and more (this will not be provided with the package)
  • Refrain from using the Force Power Off option until there is an emergency and it is required
  • The ODROID-GO Advance can be turned OFF if you press the ON/OFF button for 6 seconds at least (this option shall be availed in dire circumstances when no other choice to turn OFF the device is available)

Specifications of ODROID-GO Advance Black Edition

  • Central Processing Unit: Quad-Core 1.3 GHz Rockchip RK3326 ARM Cortex-A53
  • Graphics Processing Unit: Dvalin Mali G-31 GPU
  • Storage: MicroSD Card Slot compatible with UHS-1 | 16 MegaBytes Boot SPI Flash
  • Display: TFT LCD 3.5-inch (MIPI, ILI9488 interface) 320x480p
  • Memory: DDR3L 1GB 786 MHz (Width of Bus is 32 Bits)
  • Battery: Li-Polymer Battery 3.7V/3000mAh (you can exercise gaming for approximately 9 consecutive hours)
  • Audio: 0.5Watt Earphone Jack 8Ω Mono
  • Input Buttons: From F1 to F6, Left Shoulder 1 and 2, Direction Pad, Analog Joystick, X, Y, A, B, Right Shoulder 1 and 2
  • DC Jack: Power Connector USB-C (package will include a cable for charging) | 5V input is compatible
  • Wireless: 4GHz Built-in ESP-WROOM-S2 802.11b/g/n
  • External I/O: 10-Pin Port (GPIO, I2C, and IRQ @ 3.3Volt) | 1x USB 2.0 HOST
  • Power Off Mode: Less than 1mA
  • Power Consumption by Game Emulation: 300mA ~ 550mA. The consumption will primarily depend on the brightness amount you set for the backlight, the emulation type of the game, and your particular wireless usage. If you want to save power, then make sure you turn Off WiFi when not needed.
  • Charging Time: Varies from 2.5 to 3 hours (only when the module is turned OFF). Ranges from 4 hours to 5 hours when you are using the module while it is being charged.
  • Weight: 18 kg | 180 grams | 6 oz
  • Dimensions: 1 x 2.8 x 0.8 inch | 15.5cm x 7.2cm x 2cm | 155mm x 72mm x 20mm

Items Included

  • Bottom Enclosure
  • LCD Window
  • Battery Sticker
  • Board – ODROID GO Advance Black Edition
  • L, R, L2, R2, Power, X, Y, Plastic Buttons
  • Analog Joystick
  • 4x Screws (1.7x8)
  • Top Enclosure
  • Driver
  • TFT LCD 3.5-inch 320x480p
  • Battery 3000mAh
  • Rubber D-Pad
  • 6x Rubber Buttons (F1 to F6)
  • Type-C USB Power Cable
  • A, B, D-Pad Plastic Buttons
  • 7x Screws (1.7x5)
  • Speaker 0.5Watt
  • Rubber Buttons X, Y, A, B