Odroid H3 Intel Celeron N5105 2.9GHz
by Hardkernel
Original price
1 856 kr
-
Original price
1 856 kr
Original price
1 856 kr
1 856 kr
-
1 856 kr
Current price
1 856 kr
Getting Started with Odroid H3 and H3+
Odroid H3 is a high-performance SBC based on the 2.9GHz Intel Celeron N5105 processor. It is an upgraded version of Odroid H2 and the form factor is same however Odroid H3 has an improved bunch of high-performance I/O interfaces. It is an x86 64-bit SBC that supports large dual-channel RAM.
Odroid H3 Hardware Layout
Specifications of Odroid H3
Processor
- Intel Celeron N5105
- 9 GHz Quad-Core
- TDP 10W, 10nm
- Intel UHD Graphics, 900 MHz 24/32 EU
- L2 Cache 4MB
Storage Support
- eMMC Socket (x1) | Selectable and Bootable on BIOS
- 2 Slot (x1) | Supports 4x PCIe 3.0 and NGFF-2280 card
- SATA3 6.0 GB/s Data Connectors (x2)
- H3 does NOT support M.2 SATA SSD
RAM Support
- SO-DIMM Slots for DDR4 (x2) | 1.2V
- Support for up to 64GB of Total Memory
- Up to 2933 MT/sec. Dual Channel | DDR4-PC23400
- H3 Does Not Support DDR5 and DDR3
Networking Support
- RJ45 LAN Ports (x2) GbE Ethernet Support 10/100/1000/2500 Mbps
- Realtek RTL8125B
- Wake-On-Lan Support
- LED Indicators (Amber for Traffic and Green for Link)
Audio Support
- SPDIF Out (x1) HAD and ALC1200 Codec Support
- Audio Out Jack 3.5mm (x1)
- DP and HDMI also support Audio Output
Video Support
- Supports simultaneous dual display
- HDMI 2.0 Port (x1) supports up to 4K @60Hz
- DisplayPort DP 1.2 supports up to 4K @60Hz
External I/O
- Peripheral Expansion Header 2.54mm Pitch 24 PIN
- USB 2.0 HOST Ports (x2)
- USB 3.0 HOST Ports (x2)
- USB 2.0 Ports (x3)
- DC 5V (x1)
- GND (x5)
- DC 3.3V (x1)
- UART (x1) | RTS, TXD, TXD, CTS
- All 3.3V I/O Signal Level
- I2C (x2) SDA, SCL
- HDMI CEC, 5VA+
- External Power Button (x1)
Power Consumption
- CPU Stress: ≃15W
- CPU and GPU Stress: ≃18W
- IDLE: ≃9W
- Power OFF: ≃25W
- Suspend: ≃6W
Power Input Compatibility
- DC Power Jack 5.5mm Outer (-ve) and 2.1mm Inner (+ve) | DC 14V ~ 20V up to 60W
- DC 19V / 7A Power Supply is recommended if you are using 2x 3.5” HDDs
- DC 15V / 4A Power Supply is recommended if you are not using 2x 3.5” HDDs
General Features
- Passive Heatsink
- Supports optional Active Cooling Fan (Not included)
- BIOS Backup Battery for BIOS Settings and Time Tracking
- SLEEP LED (Blue - Left) while the system is in the Sleep Mode
- NVMe LED (Green) flashed while NVMe is transferring data
- PWR LED (Red) while the DC power supply is connected
- PMIC LED (Blue – Right) while the major power rails are at work
- SATA LED (Amber) flashes while DATA is transferring data
- Power Button
- Reset Button
Odroid H3 Dimensions
- 11cm x 11cm x 4.7cm | 110mm x 110mm x 47mm
Items Included
- Odroid H3