Yamaichi STM32 QFP64 Programmer Adapter

Download STM32-QFP64 Schematics

The STM32-QFP64 programmer Adapter is compatible with the STM32 microcontroller series. It is a programmer adapter with the Test and Burn-In socket. The adapter features the 20-Pin JTAG / SWD port with the USART1 4-Pin interface support for testing and programming.

Features of Yamaichi STM32-QFP64 Programmer Adapter

• JTAG / SWD 20-Pin Port and USART1 4-Pin Interface for testing and programming
• Onboard Socket to connect system clock with the external crystal
• Crystal Oscillator Onboard 32.768K
• LED indicators (x2) for testing | connect to the I / O Pins through jumpers
• Access to all MCU pins through expansion connectors | 2.54mm (100 mil) Pin Header Pitch

Compatible Devices

The STM32-QFP64 Programmer Adapter is compatible with the STM32 microcontroller in QFP64 (0.5mm Pitch):

• STM32F4xxR Series | STM32F415RB and STM32F407RC, etc.
• STM32L1xxR Series | STM32L152RB and STM32L151R8, etc.
• STM32F3xxR Series | STM32F373RB and STM32F303R8, etc.
• STM32F0xxR Series | STM32F051RB and STM32F051RC, etc.
• STM32F1xxR Series | STM32F100RB and STM32F103RC, etc.
• STM32F2xxR Series | STM32F215RB and STM32F207RC, etc.

The onboard Device Selection Jumpers should be configured according to the STM32 microcontroller version you are using for programming.

STM32-QFP64 Hardware Layout

1. JTAG / SWD Port

• For testing, debugging, and programming
• Compatible with J-LINK, ST-LINK, STX-RLINK, and ULINK2

2. USART1 Port

• For Serial port debugging
• ISP interface support

3. LED Indicators

• Quick testing

4. Pin Headers

• Connection to MCU pins
• Clear onboard marking and labels
• Support further expansion
• Easy testing

5. Boot Mode Configuration

• Configure BOOT1 and BOOT0 using jumpers

6. AMS1117-3.3 Onboard 3.3V Voltage Regulator
7. Power Input 5V (2-pin Header or DC Jack support)
8. External Crystal Socket

• Leave the middle hole and insert the crystal into the holes on the two sides

9. Power Indicator
10. Device Selection Jumpers

• Short the Lower Headers for STM32F4xx and STM32F2xx Series
• Short the Upper Headers for STM32L1xx, STM32F1xx, STM32Fxx, and STM32F05x Series

11. LED Jumpers

• Short the jumpers for connection between the LEDs and MCU I/O pins for testing
• Open the jumpers to disconnect the LEDs from MCU I/O pins

12. Onboard Crystal 32.768K (on the back side)

• For internal RTC with calibration

JTAG / SWD Connector Layout

Boot Mode Configuration

Dimensions (Reference Unit = mm.)

• Pins: 64
• Pitch: 0.5mm
• A x B: 10mm x 10mm
• C x D: 12mm x 12mm
• E: 11.3mm
• G x H: 32mm x 35mm

Items Included

• Programmer Adapter STM32-QFP64
• USB Power Cable