Raspberry Pi LoRaWAN Gateway HAT SX1302 868M EU868 GNSS L76B

The LoRaWAN Gateway HAT has been designed to work with most Raspberry Pi motherboards. It has an SX1302 868M LoRaWAN Gateway module. This LoRaWAN Gateway HAT is ideal for Long-Range transmission, concurrent communication, large capacity node, and high receiving sensitivity. The HAT also features the L76B GNSS module. In addition, the Mini PCIe socket is available on the baseboard.  

Raspberry Pi Compatibility

This LoRaWAN Gateway HAT comes with the standard 40 PIN Raspberry Pi extension header. You can use it with most Raspberry Pi series boards. The L76B GNSS module is compatible with GPS / BD for accurate clock information and location.

Features of LoRaWAN Gateway HAT for Raspberry Pi

• Semtech SX1302 normal band – upgraded performance
• EU868 band compatible
• SX1250 radio RF front-end chip
• Supports 10x signal channels and multiple nodes concurrent communication
• LNA and PA onboard | 26 dBm emit power | -141 dBm receiving gain high sensitivity
• Forward Error Correction (FEC) Algorithm
• 19 Kbps (SF5 / BW125 KHz) Data Rate
• Spreading Factor SF5 ~ SF12
• Longer Distance, Fast Data Rate, Lower Power Consumption
• Easy integration to the embedded systems via Mini PCIe Socket and SPI communication protocol support

Specifications of LoRa Gateway Module for Raspberry Pi

• Compatible Power Supply: 5V
• Frequency Range: EU868 | 863 MHz ~ 870 MHz
• Modulation: LoRa / (G) FSK
• Emit Power: > 26 dBm @ 5V
• Receiving Sensitivity (SF12): -121 dBm @ 125 KHz
• Receiving Sensitivity (SF12): -141 dBm @ 125 KHz
• Power Consumption (Emitting): 710 mA @ 5V (GPS On)
• Power Consumption (Receiving): 99 mA @ 5V (GPS On)
• Power Consumption (Sleep): 41 mA @ 5V (GPS Off)
• Communication Bus: I2C, SPI
• External Connector: Mini PCIe
• Operating Temperature: From -40^oC to 85^oC
• Dimensions: 50.95mm x 30mm | 5.095cm x 3.0cm

Specifications of L76B GNSS Module

• Frequency Range (BD2 B1): 1561.098 MHz
• Frequency Range (GPS L1): 1575.42 MHz
• Positioning Accuracy: < 2.5m CEP
• Receiving Sensitivity (Acquisition): -148 dBm
• Receiving Sensitivity (Tracking): -163 dBm
• Receiving Sensitivity (Re-Acquisition): -160 dBm
• Communication Bus: UART
• Dimensions: 65mm x 56.50mm | 6.5cm x 5.65cm

Hardware Components

• LoRaWAN Gateway Module SX1302 868M
• Mini PCIe Buckle and Socket
• GNSS Module L76B
• Power Chip RT9193-33
• Power (PWR) Status Indicator
• PPS: GPS Status Indicator
• UART RX / TX Indicator
• 40 Pin Raspberry Pi GPIO Header
• Antenna Connector for L76B GNSS Module
• LoRa Gateway Antenna Connector
• Battery Holder (Compatible with rechargeable ML 1220 battery)

Note: Battery is NOT included

Items Included

• LoRaWAN Gateway HAT SX1302 (X1)
• LoRaWAN Gateway Module SX1302 868M (x1)
• GPS Antenna (x1)
• Antenna 868M 5 dBi (x1)
• Dual IPEX1 Wire (x1)
• Female Pin Header 2x 20 Pin (x1)
• Pack of Screws